South End Plumbing, Heating, & Air Expert Tips

Are SharkBite Fittings as Good as Glued or Solder?

SharkBite fittings, a type of push-fit fittings, are very convenient tools. They enable you to connect two separate pipes without soldering them together. They’re easy, fast, and will conserve you a great deal of time. Nevertheless, numerous plumbers feel that there are times when you need to use them, and after that there are times when you shouldn’t. Prior to we start, it is necessary to have a mutual understanding of how they work.

SharkBite fittings are composed of three parts, a collet, an O-ring, and a locking mechanism. The collet has a ring of metal teeth that strongly grab the pipe, the O-rings create a waterproof seal, and the locking system keeps all elements together. SharkBite fittings work well with PEX, CPVC, and copper. If you’re utilizing SharkBite fitting with hard drawn copper, ensure the copper is a K, L, or M type.

To utilize SharkBite fittings, you simply have to press them into the ends of both pipes that you want to connect. It’s that easy. There are no tools needed, and linking them takes seconds. This is much faster than soldering your pipes together.

Can You Still Still Flush A Toilet
With The Water Turned Off?

We’re all extremely familiar with the comforts of the modern technology of plumbing. Have you ever turned on a light switch despite the fact that you knew the power was out? How about describing to a child why their online videos aren’t playing when out of the range of the wifi? Basically, we’re all extremely utilized to having things work when we need them to.

However what if you find yourself in a position where the water to your home is turned off and you need to flush the toilet? The good news is that it can still work thanks to the ageless design of the gravity-flush toilet.

What Causes a Garbage Disposal to Leak?

Got A Leaking Garbage Disposal?
Before you start wondering the length of time a garbage disposal lasts or making a strategy to change your garbage disposal, there are three common places for an under-sink disposal to leak. Here’s our breakdown of the likely perpetrator of each of these and what it needs to fix them.

How to Thaw Your Icemaker

Ice makers are a contemporary convenience supplied with many side-by-side refrigerator designs. If your ice maker is not producing ice, or if the ice produced is too small, the benefit is not so terrific. Typically this is because of a frozen fill tube, which may be triggered by ice supporting in the bin, or a refrigerator thermostat that is set too low. You might disconnect the refrigerator to thaw the lines, but this needs emptying the contents of the refrigerator. A more convenient choice is to use a hairdryer to quickly target the heat where needed and thaw the lines.

Do You Save Any Money When Adjusting Water Heater Temps?

Your hot water heater is one of the most significant energy consuming devices in your home, so if you’re searching for a location to cut down on energy expenses, it’s a good place to start. Before you adjust down your water heater’s thermostat a couple of degrees, there are a few things you may want to consider.

If you the temperature level too low, and you might risk turning your hot water heater into a breeding ground for harmful bacteria. And if you set it too high, you could be setting yourself up for a scalding accident (especially with kids).

Risk of Buying/Selling a Home With Unpermitted Plumbing Work

Purchasing a new home can be a dream for many Americans. That dream can end up being a headache, nevertheless, if you buy a house with unpermitted work.

Bypassing the permit process might not seem like a big deal, however the consequences can be pricey. Depending on the laws where you live and the type of unpermitted work that was done, you could be responsible for countless dollars in charges and repair work. Prior to your of purchase a home with a questionable license history, make certain you understand and are willing to accept the risks.